Protective gowns · standards

Surgical Gown Standard Guide

AAMI PB70 and EN 13795 define how surgical gowns resist fluid — here is what the levels mean and how to match a gown to the procedure.

Alıcı rehberi

Nelere dikkat edilmeli

01

AAMI PB70 barrier levels: what each number means

AAMI PB70 grades surgical gowns into four levels of fluid resistance, and the level is the single most important number on a gown specification. Level 1 resists light fluid and is meant for minimal-risk contact. Level 2 resists splash and light spray, which covers most routine care. Level 3 resists heavier fluid exposure and is the common choice for surgery and high-fluid procedures. Level 4 resists viral penetration under pressure and is reserved for the highest-risk, high-fluid surgical work. The level is not a quality score — it is a match to the procedure, so a Level 1 gown is not 'worse' than a Level 4 gown, it is simply specified for a lower-risk task.

  • Level 1: minimal fluid risk, light contact
  • Level 2: splash and light spray, routine care
  • Level 3: heavier fluid exposure, surgery
  • Level 4: viral penetration resistance under pressure
02

Critical zones: where the rated barrier must hold

AAMI PB70 does not require the whole gown to meet the same barrier. It defines critical zones — the front, the sleeves and the seams — where the gown must provide its rated level, while the back and other non-critical areas may carry a lower barrier. This is why two gowns with the same level can protect differently: a gown with full critical-zone coverage protects the surgeon's front and arms, while a gown with a shorter critical zone leaves more of the torso exposed. When you compare gowns, check the critical-zone coverage on the specification sheet, not just the level number.

  • Critical zones are the front, sleeves and seams
  • The back and non-critical areas may be lower barrier
  • Check critical-zone coverage, not just the level
03

EN 13795 for the European market

EN 13795 is the European standard for surgical gowns and drapes. Instead of a single level, it classifies gowns by performance in specific areas — resistance to liquid penetration, resistance to microbial penetration and cleanliness — and grades each as standard or high performance. A gown that is high performance for liquid resistance may be standard for microbial resistance, so read the full performance profile rather than a single grade. For European export, confirm the gown is tested to EN 13795 and that the performance values match the procedure you are supplying.

  • EN 13795 grades liquid and microbial resistance separately
  • Each property is rated standard or high performance
  • Read the full profile, not a single grade
04

Match the gown to the procedure and the market

The right gown balances barrier level, material and cost against the actual procedure. For low-risk care, a Level 1 or 2 gown is sufficient and more economical. For surgery and high-fluid procedures, choose a Level 3 or 4 gown with reinforced critical zones and sealed seams. Then match the standard to your target market — AAMI PB70 for North America, EN 13795 for Europe — and request the certification file for the exact model before ordering, because a certificate that names a different model is not proof your order is compliant.

  • Level 1–2 for low-risk care, Level 3–4 for surgery
  • Reinforced critical zones and sealed seams for high fluid
  • Match the standard to your target market
Alıcı SSS

Sık sorulan satın alma soruları

What is the difference between AAMI Level 2 and Level 3?+

Level 2 resists splash and light spray, while Level 3 resists heavier fluid exposure. Level 3 is typically used for surgery and high-fluid procedures.

What are critical zones on a surgical gown?+

Critical zones are the front, sleeves and seams where the gown must provide its rated barrier. Check the gown's critical-zone coverage to ensure it matches the procedure.

Is EN 13795 the same as AAMI PB70?+

They are different standards from different regions. EN 13795 is used in Europe and AAMI PB70 in North America. Match the standard to your target market.

Teklif alın

Gereksinimlerinizi bize iletin

Ürün tipinizi, miktarınızı ve varış yerinizi paylaşın. İhracat ekibimiz siparişiniz için sertifika dosyalarını, MOQ'yu ve üretim/teslim süresini doğrulayacaktır.

  • CE / FDA sertifika dosyaları
  • MOQ, ambalaj ve onaylanmış üretim/teslim süresi
  • Markanız için OEM / özel markalama seçenekleri
Product Inquiry
◆
Product Inquiry
Surgical Gown Standard Guide (wholesale inquiry)
◆